Heaters and Heating Mantles

Bibby Scientific™ Stuart™ EM Series Electromantle Heating Mantle

Use these heating mantles for a variety of applications. Bibby Scientific™ Stuart™ EM Series Electromantle Heating Mantles provide maximum heat transfer to the sample thanks to excellent insulation around the cartridge and good flask coverage. HEATING MANTLE 500ML 230V

Electrothermal™ Multi Extraction Mantles - 6 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” SOXHLET AIR BATH FOR 6 X 250ML FLASKS, 200-250V50-60HZ

Electrothermal™ CMU Metal Controlled and Uncontrolled Heating Mantles

Features aluminum housing that is tough, chemical-resistant, lightweight and easy to clean ELECTROMANTLE 500ML

Electrothermal™ Digi-Mantle Digital Controller

Accurate low speed stirring control and higher stirring speeds. Electrothermal™ Digi-Mantle Digital Controllers provide uniform stirring via a motorized rotating magnet assembly positioned to provide maximum flux linkage to rotate the stirrer bars in each reaction vessel. CONTROLLER ELECTROTHERMAL 240V OMNI

Electrothermal™ EMV Series V-Shaped Electromantle

Accommodates 60°C funnels, pear-shaped or round bottom flasks. Electrothermal™ EMV Series V-Shaped Electromantle has been designed to accept a large range of flasks and funnel sizes for added flexibility.The stainless steel screen on all EMV models covers the heater element to protect against shock hazards due to spills or flask breakage. MULTIMANTLE 2000-5000ML

Stuart™ HM100C Model Heating Mantle

Heating mantle Bibby HM100C controllable 230V50Hz 105W 50- 450C 100mL flask

Thermo Scientific™ Reacti-Vap™ Evaporators

Add evaporation to the Thermo Scientific™ Reacti-Therm™ Heating and Stirring module for derivatization or other small scale reactions.

EVAPORATOR REACTI-VAP 27 PORTfor triple block Reacti-Therm heating module

Electrothermal™ HT95503 Glass Fibre Heating Tape

A flexible heater tape that is ideal for heating columns, pipes, valves and transfer lines, especially when these applications need to be observed. It can be applied to metal pipes as well as glassware. HEATING TAPE HT9 MAX TEMP 450 C 25MM WIDE 0.9MLONG 230V 150W

Electrothermal™ Polypropylene Controlled Heating Mantles

Features a durable, chemically resistant polypropylene outer housing. Fisher Scientific™ Polypropylene Controlled Heating Mantles minimize damage from spills and allow for maximum heat transfer with minimal risk of flask breakage. HEATING MANTLE 2000ML 230

Electrothermal™ EMX Series Spill-Proof Electromantle

Accommodates 60°C funnels, pear-shaped or round bottom flasks. Electrothermal™ EMX Series Spill-proof Electromantle is designed to accept a large range of flasks and funnel sizes for added flexibility. Stainless steel liner over the heating element providea additional electrical and mechanical protection against spills and ensures easier cleaning. Electro-heating mantle 2 000ml to 5 000ml V-shaped

Electrothermal™ EM Series Controlled Electromantle

Includes a built-in energy regulator with indicator lamps for power and heater operation. Electrothermal™ EM Series Controlled Electromantle incorporates a grounded earth screen and double fuses for added safety. Larger capacity products have multiple heating elements, enabling a more even and directed transfer of heat. HEATING MANTLE 1000ML 230

Electrothermal™ Heating and Stirring Mantles

Chemically resistant polypropylene outer casing. Electrothermal™ Heating and Stirring Mantles offer single or bi-directional stirring. HEAT/STIR MANTLE 500ML 230V

Horst™ Glass Fiber GBW Model Fleecy Tape

Fleecy glass fiber tape for insulating heated sections. Horst™ GBW Glass Fiber Fleecy Tape provides protection up to 450°C. 30M ISOLATING BAND FIBERGLASS

Bibby Scientific™ Electrothermal™ Heating Mantle Spare Element

HEATING MANTLE SPARE ELEMENT FOR EM SERIES 3000ML

Fisherbrand™ Heating Mantle with Controller

Reaches maximum temperatures up to 450°C. Fisherbrand™ Heating Mantle with Controller employs a unique airflow system to keep the exterior cool to the touch. HEATING MANTLE 100ML80 W

Electrothermal™ Multi Extraction Mantles - 3 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” EXTRACTION EQUIPMENT 3X100ML

Thermo Scientific™ Gas Regulators for Reacti-Vap™ Evaporators

Use these gas regulators to deliver the right amount of gas for sample evaporation using the Thermo Scientific™ ReactiVap™ Evaporator.

GAS REGULATOR 1/4' TUBE

Electrothermal™ CMUV Series Large Volume Controlled Mantle

Delivers the benefits of the CMU Electromantle, but for very large 60°C funnels, as well as pear-shaped and round bottom flasks. Electrothermal™ CMUV Series Large Volume Controlled Mantle accommodates funnels through bottom opening in the Electromantle base achieved through a “V-shaped” design for the heating mantle. Electro-heating mantle 10L capacity

Electrothermal™ EMA Series Controlled Sitrring Electromantle

Includes a built-in energy regulator with indicator lamps for power and heater operation. Electrothermal™ EMA Series Controlled Sitrring Electromantle incorporates a grounded earth screen and double fuses for added safety. Larger capacity products have multiple heating elements, enabling a more even and directed transfer of heat. STIRRER MANTLE FOR 1000ML FLASK

Fisherbrand™ Heating Mantle

Use these heating elements with built in controllers for a variety of applications. Fisherbrand™ Heating Mantles are metal cased with a unique airflow keeping the exterior cool to the touch. HEATING MANTLE 50ML60 W

Electrothermal™ HT9 Series Glass Fibre Heating Tapes

Provides heat for columns, pipes, valves and transfer lines, especially when these applications need to be observed. Electrothermal™ HT9 Series Glass Fibre Heating Tapes can be applied to metal pipes as well as glassware. HEATING TAPE HT9 MAX TEMP 450 C 25MM WIDE 2.4MLONG 230V 400W

Cole-Parmer™ Replacement Heating Elements

Replacement heating elements for heat sealer, 8",230 VAC

Electrothermal™ Multi Extraction Mantles - 3 Recess Model, Heating Only

Vented case's unique airflow ensures the unit remains “cool-to-the-touch” SOXHLET AIR BATH FOR 3 X 250ML FLASKS 220-240V50-60HZ

Electrothermal™ Macro-Kjeldahl MQ Series Extraction Heater

Choose a model with 2 or 6 positions. Electrothermal™ Macro-Kjeldahl MQ Series Extraction Heater includes 2 volume sizes for both the 2 and 6 recess models, one for 100 to 300mL vessels and the second for 500 to 800mL vessels. DIGESTION UNIT CE 230V SCHUKO, 1/CsMQ3822B/EX6

Electrothermal™ EMEA Series 3-Position Extraction Mantle With Stirring

Heats multiple round bottom flasks simultaneously with the added functionality of magnetic stirring. Electrothermal™ EMEA Series 3-Position Extraction Mantle With Stirring includes a vented case with unique air flow to ensure the outer case remains safe to touch. EXTRACTION EQUIPMENT STIRRED 3X1L

Electrothermal™ Metal Case Uncontrolled Electromantle

The basic Thermo Scientific metal case uncontrolled mantle provides an element temperature of 450°C ELECTROMANTLE 100 ML

Electrothermal™ Digi-Mantle Kit

Enables a round bottom flaskto be stirred and heated through precise electronic control. Electrothermal™ Digi-Mantle Kit gives an accurate measure of temperature and stirring. Digi-Mantle-Kit 1,000mL capacity

Bibby Scientific™ Heating Mantle Spare Element

HEATING MANTLE SPARE ELEMENT FOR EM SERIES 50ML

  spinner