GFL Gesellschaft Fuer Labortec™ Double Distillation Water Stills

Description

• Excellent distillate quality, conductivity of mono-distillate approx. 2.2μs/cm at 25°C; conductivity
• of bi-distillate approx. 1.6μs/cm at 25°C
• Evaporator and baffle of the mono stage are easily accessible by lifting the condensers. Material: stainless steel, material no. 1.4301
• Condensers (coolers): 1st stage made of stainless steel, material no. 1.4301; 2nd stage including baffle made of DURAN / Borosilicate glass 3.3
• Heating elements made of stainless steel, material no. 1.4876
• Water supply through built-in solenoid valve with connection for water pressure hose 1/2 inch (inner Ø 12.7mm)
• Required cooling water pressure: >3 bar to max. 7 bar. After switching on the main switch the solenoid valve opens the water supply
• Cooling water outlet with hose connection 3/4 inch (inner Ø 19 mm)
• Water that has not been condensed flows off through the cooling water outlet
• Energy-saving through distillation of the heated cooling water
• Distillate withdrawal: stop valve made of Borosilicate glass 3.3 with PTFE plunger for mono distillate, outlet with dust guard shield made of Borosilicate glass 3.3 for bi-distillate
• Low water cut-off: float switch and thermostatic over-temperature cut-out
• Electronic impurity detector switches the unit off in case of high degree impurities in the 1st stage evaporator, the red pilot lamp "Clean" will glow
• Degassing of carbon dioxide through vent on the condensers
• Main switch and pilot lamps to monitor both distillation stages are on the front of the unit
• Two-part housing made of electrolytically galvanized sheet steel, electrostatically powder-coated with epoxy resin; upper part easily removable through quick-release catches
• Power connection through connection cable