Incubators

Eppendorf™ Lid for ThermoMixer™ F1.5 and FP

Use this lid with ThermoMixer™ F1.5 and SmartBlocks™ 0.5mL, 1.5mL, 2.0mL, plates PCR 96, PCR 384. Eppendorf™ Lid for ThermoMixer™ F1.5 and FP is exchangeable in seconds. Lid for ThermoMixer F1.5, FP, Smartblock

BINDER™ Calibration Certificate with 1 Measurement Point

BINDER™ Calibration Certificate for Temperature features a variety of measuring points at specified temperatures for a range of BINDER™ incubators and chambers. Calibration certificate, temperature - for temperature, measurement in center of chamber at specifie

Grant Instruments™ Interchangeable Block for QB Series Dry Block Heaters

For use with 0.2mL tubes, strips and 96-well microtitre plates used in molecular biology and biotechnology applications. Grant Instruments™ Interchangeable Block for QB Series Dry Block Heaters can withstand temperatures up to 100°C. BLOCK QB-17H 12x17MM, DJUP 75MM

Thermo Scientific™ Support Frames for Heracell™ 150i CO2 Incubators

For use with Thermo Scientific Heracell™ 150i CO2 Incubators SUPPORT FRAME FOR SINGLE CHAMBEREinzelkammer CO2-Brutschrank HERAcell

BINDER™ Calibration Certificate with 9 Measurement Points

BINDER™ Calibration Certificate for Temperature features a variety of measuring points at specified temperatures for a range of BINDER™ incubators and chambers. Calibration certificate, temperature - temperature measurement incl. certificate, 9 measuring points

IKA™ DB 5.4 Block

DB 5.4 BLOCK 19 MM VIALS, 19,7X45MM

BINDER™ Right Access Port 50 to 125 mm

BINDER™ Right Access Port is an accessory for use on the right of a variety of chambers and incubators. Cable entry diameter 125mm right side

OHAUS™ Module Block for Vials

OHAUS™ Module Block for Vials features close contact of tubes-to-walls allowing for maximum heat retention and is available with or without a thermometer well. Module Block For Vials 23 mm

BINDER™ Interface Converter

BINDER™ Interface Converter for connection to 10-way plug distributor or for connection to a variety of chambers and incubators. Interface converter, RS232/RS422 - 230V - RS 422 cable set and RS 232 / RS 422 interface converter

BINDER™ Viewing Window and Interior Lighting

BINDER™ Viewing Window and Interior Lighting provides visibility and illumination for incubators and chambers. Viewing window and interior lighting - 230 V option model, viewing window in each door, 350 x 240 mm

BINDER™ Top Access Port 10 to 50 mm

BINDER™ Top Access Port is an accessory for use on the top of a variety of chambers and incubators. Access port with silicone plug - 30 mm, top

Binder™ Fixed Position Shelf

Binder™ Fixed Position Shelf with additional attachment for operation of shaking devices, stirring devices or roller bottle systems. Shelf, reinforced - positioned at bottom level, max. load 67 kg

OHAUS™ PCR Plate Thermal Block

OHAUS™ PCR Plate Thermal Block is a 384 well block. 384 Well PCR Plate Thermal Block

BINDER™ Pt 100 Temperature Sensor

BINDER™ Pt 100 Temperature Sensor for displaying temperature on the unit display. Pt 100 temperature sensor - additional flexible Pt 100, interior

BINDER™ Series KBF-S Solid.Line Humidity Test Chamber

BINDER™ Series KBF-S Solid.Line Humidity Test Chamber, with corrosion and condensation-free interior for ensuring stable temperature and moisture levels, is ideal for long-term and accelerated stability testing of pharmaceutical products. KBFS1020-230V, Constant climate chambers with large temperature/humidity range, 1020 L

Thermo Scientific™ Data Output Accessories for Environmental Chambers and Incubators

Integrate Thermo Scientific™ Data Output Accessories for your environmental chamber or incubator to increase functionality and compatibility. 0-1V INTERFACE, FACTORY INSTALLED

Thermo Scientific™ O2 Control for Heracell™ VIOS 160i and Forma™ Steri-Cycle™ i160 Incubators

Transform your Heracell™ VIOS 160i and Forma™ Steri-Cycle i160 Incubators into a variable control oxygen incubator with O2 control. 15343012 1-21% O2 control CO2 incubator with 3 inner doors

Binder™ Avantgarde.Line Model FD 115 Drying and Heating Chambers with Forced Convection

Use when fast drying and sterilization is required. Binder™ Avantgarde.Line Model FD 115 Drying and Heating Chambers with Forced Convection comes with homogeneous temperature distribution, quick dynamics and powerful fan. FD115-230V, Standard, Series FD - Drying/heating chambers Avantgarde.Line with forced convection

Thermo Scientific™ Heracell™ VIOS 250i CO2 Incubator with Stainless Steel Chamber

Achieve your next breakthrough. This CO2 incubator delivers the performance reliability, ease of operation, and value required to support a range of culturing needs. CO2 incubator HERAcell VIOS 250i, TC sensor,stainless steel chamber, HEPA, 255 liters

BINDER™ Perforated Shelf

BINDER™ Perforated Shelf is constructed of stainless steel for long-lasting durability in a variety of incubators, chambers, and freezers. Shelf, perforated - stainless steel

Thermo Scientific™ Shake 'n' Stack™ Hybridization Ovens

Conserve valuable space in your lab with these ovens, featuring a stackable, space-saving design with excellent uniformity ideal for molecular biology labs. Hybaid Shake'n'Stack oven NEW MODEL (includes 10bottle capacity rotisserie, adjustable feet, drip

Thermo Scientific™ Accessories for Digital Heating Cooling Drybath

Optimize the performance of your Thermo Scientific™ Digital Cooling Bath by using these accessories. HEAT/COOL BATH BLOCK 1.5 ML

OHAUS™ Modular Blocks and Accessories

Constructed from solid anodized aluminum block. Module Block 15/16 mm 12 Hole

Eppendorf SmartBlock DWP500

Thermoblock for DeepWell Plate supports optimal temperature transfer within your sample. SmartBlock DWP500, for Deepwell Plate 96/500µl, w/lid

Thermo Scientific™ Accessories for Digital Heating Shaking Baths

Use Thermo Scientific Accessories for Digital Shaking Baths to optimize flexibility and performance. 15ml Tube Block Set with Cover

BINDER™ Instrument Tray

BINDER™ Instrument Tray provided with a lid manufatured from 18/8 stainless steel. Instrument tray - small

Binder™ Warranty Extension for Model C 170 CO2 Incubators

Extension of the warranty from 2 to either 3 or 5 years. Extension of the warranty from 2 to 5 years

BINDER™ Series KBW Growth Chambers

Constructed to provide ideal growth conditions for plants and other organisms. BINDER™ Series KBW Growth Chambers features homogeneous light distribution that encourages growth. KBW400-230V growth chamber with light, 400LE6 with touch controller

Eppendorf CellXpert™ C170i, Non-Segmented Inner Door, 220 – 240 V/50 – 60 Hz

Are you looking for a CO2 incubator that offers optimized growth conditions for your sensitive cells and reliable contamination protection? An incubator that saves money and supports you to get ready for the culture of tomorrow? Let us introduce CellXpert™ - a new family of Eppendorf CO2 incubators. CO2 Incubator CellXpert C170i, non- segmented inner door, handle left side

  spinner