Filter Holders and Hardware

Merck Millipore Glass Vacuum Filter Holder: 90 mm

Vacuum filter aqueous, organic, or corrosive liquids for particulate contamination analysis.

Sartorius™ Accessories for Combisart™ Systems: Filter Holders

Filter holders for use with Sartorius Combisart Systems

Merck Millipore All-Glass Filter Holder Kit

All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis.

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (90mm)

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter

Merck Millipore 142mm Hazardous Waste Pressure Filter System

Separates solid and liquid phases of waste samples

Merck Millipore Glass Vacuum Filter Holder, 47mm

Includes 300mL funnel, fritted base and cap, clamp, and alignment sleeve. Glass Vacuum Filter Holders, 47mm are used in vacuum filtration of liquids to produce clarified or particulate-free filtrate or to analyze particulate or biological contamination retained on the filter surface.

Cytiva (Formerly GE Healthcare Life Sciences) Whatman™ AS 300 Series Multiple Vacuum Filtration Apparatus

AS300/3 Multiple Vacuum Filtration Apparatus, three-place vacuum filtration system, stainless steel 500 ml, 47/50 mm, support screen

Merck Millipore Rotary Agitator

Holds from one to four units

Merck Millipore Swinnex™ Filter Holders

Ultraclean or sterilize small volumes of liquids dispensed by syringe

Merck Millipore All-Glass Filter Holder Kit

All-Glass Filter Holder Kit was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis.

Merck Millipore Base and Stopper for 47mm Glass Vacuum Filter Holders

Replacement part for the XX1014700/XX5014700 vacuum filter assemblies. Base and Stopper for 47mm Glass Vacuum Filter Holders is a borosilicate fritted-glass filter holder base with a silicone stopper that is used to connect the filter assembly to the filtering flask or manifold.

DWK Life Sciences DURAN™ Filter Disc Sintered Glass, Porosity 0, edge not fused

A prerequisite for successful work with glass filters is the selection of the right porosity. It is important to select a filter whose largest pore size is slightly below the grain size of the smallest particles still to be separated.

Cytiva (Formerly GE Healthcare Life Sciences) Whatman™ Vacuum-Type Glass Membrane Holder

Produced from borosilicate glass and available with a choice of support screen. Whatman™ Vacuum-Type Glass Membrane Holder is suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane.

DWK Life Sciences DURAN™ 5.8 mm Connector for Syringe Filter (without filter)

A resusable connector GL 45 cap with two ports for connecting tubing.

DWK Life Sciences DURAN™ Filter Disc Sintered Glass, Porosity 3, edge not fused

A prerequisite for successful work with glass filters is the selection of the right porosity. It is important to select a filter whose largest pore size is slightly below the grain size of the smallest particles still to be separated.

Merck Millipore 13mm Analytical Stainless-Steel Vacuum Filter Holder

Vacuum filter small volumes for precise particulate contamination analysis

Merck Millipore Dispensing Pressure Vessels

Holds liquid for filtration through pressure-operated filter holders, if connected to an external pressure source

Merck Millipore Base and Cap for Vacuum Filtration with Glass Frit Support

Designed to replace parts contained in glass vacuum filtration kits or provide for an alternative configuration

Sartorius™ Tubing with Quick Connection Coupling (PSU)

Transparent silicone tubing (20cm) with pre-assembled Quick Connection Coupling for vacuum-sided connection.

Thermo Scientific™ Nalgene™ Vacuum Manifold

Allow for easy funnel manipulation with the widely spaced funnels of this vacuum manifold. This stable benchtop unit is made of high quality stainless steel.

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (47mm)

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination

Merck Millipore Classic Glass Filter Holder Kit

Classic Glass Filter Holder Kit with multipurpose design that is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application needs.

DWK Life Sciences Wheaton™ Stainless Steel Support Screens

For vacuum filtration assembly. Wheaton™ Stainless Steel Support Screens are manufactured from the highest quality materials.

Merck Millipore EZ-Fit™ Filtration Unit

For bioburden testing of liquid samples like water, process samples, or final products

Merck Millipore Stainless-Steel 13 and 25mm Filter Holders

Ultraclean or sterilize small volumes dispensed by syringe

Merck Millipore EZ-Pak and Microfil System

For the ultimate in convenience and safety. EZ-Pak and Microfil System includes ready-to-use, sterile filtration funnels and a unique filtration support to facilitate sample processing.

Cytiva (Formerly GE Healthcare Life Sciences) Whatman™ Swin-Lok™ Filter Holders

For microfiltration and ultra cleaning of small volumes of liquids

Cytiva (Formerly GE Healthcare Life Sciences) Whatman™ SF 100 Suction Flask

SF 100 Suction Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories

  spinner