Filter Holders and Hardware

Duran™ Sintered Glass Filter Disc, 40mm Diameter

Duran™ glass filter for filtration both during analytical as well as preparative work. X10 DURAN Filter discs, POR.5, D. 40 mm

EMD Millipore™ 47mm Glass Vacuum Filter Holders

Designed to support bacteriological analysis and analysis of particulates in water and other fluids. EMD Millipore 47mm Glass Vacuum Filter Holders include a glass funnel and base, aluminum clamp and silicone stopper. Available with PTFE-coated sealing surfaces or a stainless steel filter support. GLASS HOLDER 47MM PTFE COATED 300ML FUNNEL

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (90mm)

Designed for large sample volumes or samples with high particulate loads that would tend to clog a 47 mm diameter filter FUNNEL/SUPPORT ASSY 90MM

DWK Life Sciences Wheaton™ Stainless Steel Support Screens

For vacuum filtration assembly. Wheaton™ Stainless Steel Support Screens are manufactured from the highest quality materials. SS SUPPORT SCREEN FOR 10027

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (47mm)

Used for general filtration and is designed to handle up to 500mL of sample liquids for the analysis of particulate or microbiological contamination FUNNEL 300ML WITH GLASS FRIT 47MM

GE Healthcare Whatman™ Vacuum-Type Glass Membrane Holder

Produced from borosilicate glass and available with a choice of support screen. Whatman™ Vacuum-Type Glass Membrane Holder is suitable for aqueous and organic solvent filtration. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane. MB FILT HOLDER 1L GLASS SUPP 90MM

Duran™ Sintered Glass Filter Disc, 50mm Diameter

Duran™ glass filter for filtration both during analytical as well as preparative work. X5 DURAN Filter discs, POR.3, D. 50 mm

EMD Millipore™ Accessories for Dispensing Pressure Vessels

Accessory for use with Dispensing Pressure Vessels BUBBLE POINT TEST ASSY ASME

Duran™ Syringe Filter Connector for GL 45 Cap Connection System

Use this connector to add a syringe filter to your GL 45 Cap Connection System. Duran™ Syringe Filter Connector for GL 45 Cap Connection System facilitates proper venting. X2 Syringe Filter Connector female luer slip to 5.8mm male connector w/out filter

EMD Millipore™ Replacement Parts for 90mm Glass Filter Holder

Replacement parts for 90mm All-glass filter holder SPRING CLAMP F/90MM GLASS FILTER HOLDER

EMD Millipore™ Sterifil™ 47mm Aseptic Vacuum Filter System and Holder

Closed unit for particulate or biological contamination analysis PLASTIC FILTER HOLDER 47MM STERIFIL

EMD Millipore™ MultiScreen™HTS Vacuum Manifold

For vacuum filtration using 96- and 384-well MultiScreenHTS, MultiScreen™ Solvinert, and Solvinert Deep Well filter plates MultiScreen HTS Vacuum Manifold

EMD Millipore™ EZ-Fit™ Manifold 6-Place for Rubber Stopper Tulip

For use in general microbiological analysis EZFIT MANIFOLD 6 PLACE FOR RUBBER STOPPER TULIP

GE Healthcare Whatman™ WT 100 Witt's Flask

WT 100 Witt's Flask, 1000 ml with tubing nozzle, vacuum filtration apparatus accessories, for filtrate collection in an inserted container. WT 100 WITT'S FLASK WITHLATERAL TU

GE Healthcare Whatman™ Vacuum Filter Holders: Stainless Steel

Made from borosilicate glass with stainless steel support screen FUNNEL 50ML GLASS SUPP 25MM

Sartorius™ Tubing with Quick Connection Coupling (PSU)

Transparent silicone tubing (20cm) with pre-assembled Quick Connection Coupling for vacuum-sided connection. Tube quick connect Micro e. Jet-combisar

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Stainless Steel Support and Ground Joint (90mm)

Recommended when filtering large volumes of viscous or proteinaceous solutions to give the maximum flow rate COMPLETE GLASS FILTRATION SYST. 1L

DWK Life Sciences Kimble™ Kontes™ Ultra-Ware™ Microfiltration Assembly with Fritted Glass Support (25mm)

Designed to handle small volumes of liquids for analysis of particulate or microbiological contamination 15ML GLASS FILTRATION SYSTEM 25MM

DWK Life Sciences Kimble™ Kontes™ Component Parts for 25mm Ultra-Ware™ Microfiltration Assembly

Component parts for 25mm Ultra-Ware ™microfiltration assembly SPARE FRIT 25MM

Cole-Parmer™ PTFE O-Ring/Gasket/Seal

GASKET PTFE FOR SYRINGE FILTER HOLDER 13MM

Thermo Scientific™ Nalgene™ Polycarbonate Filling Bell

Transfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientifc™ Nalgene™ Polycarbonate Filling Bell. FILLING BELL PC

R&L Enterprises™ Nickel Plated Brass Vacuum Pump

Evacuates a 1L system to 200mbar in 40 seconds (water supply at 170kPa, consumption 3.5L). R&L Enterprises™ Nickel Plated Brass Vacuum Pumps do not require a tail pipe. Filter pump nickel plated brass

Duran™ Filter Tube

Designed for use with Duran™ Filtering Apparatus X10 DURAN Allihn filter tube, 30ML, porosity 1

GE Healthcare Whatman™ AS 300 Series Multiple Vacuum Filtration Apparatus

AS300/3 Multiple Vacuum Filtration Apparatus, three-place vacuum filtration system, stainless steel 500 ml, 47/50 mm, support screen AS 300/3 THREE-PLACEVACUUM MANIFOL

Duran™ Sintered Glass Filter Disc, 30mm Diameter

Duran™ glass filter for filtration both during analytical as well as preparative work. X10 DURAN Filter discs, POR.5, D. 30 mm

Duran™ Sintered Glass Filter Disc, 20mm Diameter

Duran™ glass filter for filtration both during analytical as well as preparative work. X10 DURAN Filter discs, POR.4, D. 20 mm

Sartorius™ Sterility Testing Reusable System: Manifolds

For use with Sterility testing System Stainless steel 3-place manifold

Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels

Replace #7 or #8 stoppers in any manifold or filtering flask with the Thermo Scientific™ Nalgene™ Vacuum Gasket for Filter Funnels. X6 TPE REDUCER 28 - 40 MM

  spinner